diy hardtop hoist

Source: bing.com

Introduction

If you are a Jeep owner, then you know the pain of removing and storing the hardtop. It can be heavy, bulky, and difficult to maneuver. However, with a DIY hardtop hoist, you can easily remove and store your hardtop without breaking a sweat. In this article, we will discuss how to make your own DIY hardtop hoist.

Materials Needed

Before we get started with the instructions, let’s go over the materials you will need to make your DIY hardtop hoist. These materials include:

• 4 pulleys
• 2 cleats
• 2 carabiners
• 4 anchor bolts
• 4 lengths of rope (at least 20 feet each)
• 2 pieces of wood (at least 6 feet long each)
• Drill
• Screws

Source: bing.com

Step 1: Measure and Cut Wood

The first step in making your DIY hardtop hoist is to measure and cut your wood pieces. You will need to cut two pieces of wood to the same length (at least 6 feet long each). These pieces will serve as the base of your hoist.

Step 2: Attach Pulleys

Next, you will need to attach the pulleys to the wood pieces. You will need to attach two pulleys to each piece of wood, one at each end. Make sure the pulleys are securely attached to the wood.

Step 3: Install Anchor Bolts

After attaching the pulleys, you will need to install the anchor bolts. You will need to install two anchor bolts for each piece of wood, one at each end. Make sure the anchor bolts are securely installed in the ceiling or wall, as they will be supporting the weight of the hardtop.

Step 4: Thread the Rope Through the Pulleys

With the pulleys and anchor bolts installed, you can now thread the rope through the pulleys. You will need to thread two lengths of rope through each set of pulleys (one on each side). Make sure the ropes are evenly spaced and securely tied.

Step 5: Attach the Carabiners

Next, you will need to attach the carabiners to the ropes. You will need to attach one carabiner to each length of rope. These carabiners will be used to attach the hardtop to the hoist.

Step 6: Install the Cleats

After attaching the carabiners, you will need to install the cleats. You will need to install one cleat on each piece of wood, near the bottom. These cleats will be used to secure the ropes in place.

Source: bing.com

Step 7: Test the Hoist

With your DIY hardtop hoist complete, it’s time to test it out. Attach the carabiners to the hardtop and slowly begin to lift it using the ropes. Make sure the hoist is working properly and that the hardtop is securely attached.

Conclusion

A DIY hardtop hoist is a great way to make removing and storing your hardtop a breeze. With just a few materials and some basic tools, you can easily make your own hoist and save yourself time and effort. Now that you know how to make your own DIY hardtop hoist, you can get started on your own project today!