truckstrend.com Latest Trucks Trend Information News
If you’re a Jeep owner, you know how important it is to keep your vehicle in top condition. One way to do that is by removing your Jeep’s hardtop during the summer months. However, removing and storing the top can be a challenge, especially if you don’t have help. That’s where a Jeep hoist a top comes in handy. In this article, we’ll show you how to make your own DIY Jeep hoist a top.
What You’ll Need
Before we get started, you’ll need to gather a few supplies:
- 2-inch x 4-inch boards (at least 8 feet long)
- Pulley system
- Electric drill
- Wood screws
- Heavy-duty rope or cable
- Carabiner hooks
Step 1: Build the Frame
Start by building a frame out of the 2-inch x 4-inch boards. The frame should be at least 8 feet long and 4 feet wide. Use wood screws to secure the boards together at the corners.
Step 2: Install the Pulleys
Next, install the pulleys on the top of the frame. You’ll need at least two pulleys, one at each end of the frame. Use the electric drill and wood screws to attach the pulleys securely to the frame.
Step 3: Attach the Rope or Cable
Attach the heavy-duty rope or cable to the top of the Jeep’s hardtop using carabiner hooks. Make sure the rope or cable is long enough to reach from the hardtop to the pulleys on the frame.
Step 4: Thread the Rope or Cable Through the Pulleys
Thread the rope or cable through the pulleys on the frame. Make sure the rope or cable is taut and secure.
Step 5: Hoist the Top
Finally, use the pulley system to hoist the Jeep’s hardtop off of the vehicle. Make sure the top is lifted evenly and doesn’t get caught on any obstructions.
Conclusion
With this DIY Jeep hoist a top, removing and storing your Jeep’s hardtop will be a breeze. Not only will it save you time and effort, but it will also protect your top from damage. So, grab your supplies and get to work!