diy jeep top lift

Jeep owners love their vehicles for their versatility and off-road capabilities. However, one downside of owning a Jeep is the inconvenience of removing and storing the hardtop during the warmer months. Fortunately, there is a solution that allows you to lift the top off your Jeep with ease: a DIY Jeep top lift. In this article, we will guide you through the process of building your own Jeep top lift.

What You Will Need

Before you start building your DIY Jeep top lift, you will need to gather the necessary materials:

• 2×4 lumber
• 4×4 lumber
• Steel pipe
• Steel cable
• Winch
• Wire rope clamps
• Hooks
• Bolts and nuts
• Drill
• Saw
• Tape measure
• Level
• Wrenches

Once you have all the necessary materials, you can start building your DIY Jeep top lift.

Building the Frame

The first step in building your DIY Jeep top lift is to construct the frame. Start by measuring the length and width of your Jeep’s hardtop. Cut two pieces of 2×4 lumber to the length of the hardtop and two pieces to the width of the hardtop. Use bolts and nuts to attach the pieces of lumber to form a rectangle.

Next, cut four pieces of 4×4 lumber to the desired height of your lift. Attach one piece to each corner of the rectangle using bolts and nuts.

Once the frame is complete, use a level to ensure that it is straight and even.

Adding the Winch and Cable

Now that the frame is complete, it’s time to add the winch and cable. Attach the winch to the top of one of the 4×4 posts using bolts and nuts. Thread the steel cable through the winch and attach it to the opposite corner of the frame using wire rope clamps.

Next, attach hooks to the ends of the steel cable. These hooks will be used to lift the hardtop off your Jeep.

Installing the Steel Pipe

The final step in building your DIY Jeep top lift is to install the steel pipe. Cut a piece of steel pipe to the width of the frame. Attach the pipe to the top of the 4×4 posts using bolts and nuts.

Once the pipe is in place, you can use it to lift the hardtop off your Jeep. Simply attach the hooks to the hardtop, use the winch to lift the top, and slide the top off your Jeep onto a storage rack.

Conclusion

Building your own DIY Jeep top lift is a cost-effective and convenient solution for storing your hardtop during the warmer months. With a few basic materials and some DIY skills, you can easily construct your own top lift and enjoy the freedom of driving your Jeep without a hardtop. Follow these steps and you’ll have a reliable and sturdy Jeep top lift in no time.